Video Transcript
REtracker FIZZ/BLISS Tutorial (Part 1)
Marwan Rassi · 3,800 views 25 Jul 2023 · Duration 6:24 · youtu.be/xFiuxCHhMAU
Setting up the Nucleus-M Tilta Setting up REtracker FIZZ Credit: K. Rassi (carl.rassi15@gmail.com)
Auto-generated YouTube captions, grouped into ~45-second blocks. Product and technical terms may be misspelled. Timestamps link to the video.
hello everyone welcome to this demo video where I will guide you through the setup process of the retract Fizz and Bliss with the tilta nucleus M Wireless lens control system [Music] first I will walk you through the basic settings on the controllers and the motors to start power on your wireless Fizz hand unit press the menu button and then select motor choose focus and adjust the torque to either high medium or low based on your preferences next select sync and set it as motor number one inch for your Focus motor set the direction to either counterclockwise or clockwise repeat the same process for the Zoom motor set the motor number to three
[Music] as for the iris set the motor number to 2. foreign settings double press the menu button and select motor number in the menu set it as number one to designate it as the motor for controlling your focus then navigate to Auto calibration mode and change it to manual calibration this will prevent the system from calibrating the hard stop of your focus or Zoom ring every Power Cycle repeat the same process for the rest of the motors the retractor Fizz reads the lens position in the following sequence Focus Iris and then Zoom to ensure accurate lens data reading we have assigned the focus Motors ID as one
the iris as 2 and the zoom as three inches based on this sequence start by mounting the motor using the 15 millimeter railrod support system [Music] [Music] power the motors using the DTaP power cable [Music] turn on the motor by pressing and holding the power button on the wireless Fizz hand unit press the menu button and select function choose manual calibration and select the motor you wish to calibrate press enter to
initiate the calibration process the LED screen will display instructions for each step start by turning the focus ring to its minimum position then attach and lock the motor's gear to the rubber gear strips ensuring that the gears are properly attached and securely in place return to the hand unit and press enter the instruction is currently pending for the maximum now next gradually turn the focus wheel until it reaches the maximum position making sure not to exceed the intended position once at the maximum position press enter to complete the calibration repeat the same process for the Zoom motor [Music]
the wireless remote control for both focus and zoom functions is now fully operational connect the retractor Fizz to your PC this black button which serves three functions a short press of the button initiates a restart [Music] a double press displays the unit serial number and current data frame rate while a long press allows you to enter the setup mode during the setup mode the LED screen will display your current network settings Additionally the
retractor Fizz Drive will appear on your Windows Explorer allowing for easy access launch the retracker Fizz user Settings app provided by US enter your license key if you haven't done so [Music] network settings to suit your preferences [Music] once you have made the necessary adjustments select the tilta nucleus M option from the available choices and save your changes next make a copy of the config file then proceed to replace and overwrite the existing config file on the retractor Fizz drive with the copied file [Music]
to apply the changes restart the Fizz unit after the restart the LED screen will display your selected options along with the newly configured network settings [Music] next Mount Your retractor Bliss tracking sensor and the retracker Fizz lens data interface on your camera power it with a USB 5 volt cable and connect the ethernet port to your network alternatively you can use a Poe splitter to power the device with your Poe switch while also connecting it to your network [Music]
7-pin limo connector to both the nucleus M hand unit and the retractor fizz [Music] content for this in the next video we will demonstrate the setup for re-tracker Bliss and Fizz with Unreal Engine stay tuned for more [Music]
Transcribed 8 blocks · Source: YouTube